Re-covering an upholstered chair is quite an ideal way for revitalising its look as well as bringing colour to the overall decor of the room. Before doing so, however, it is important to measure the chair properly and purchase the correct volume of upholstery materials needed as per the measurements. Knowing the quantity of materials required would also help in comparing prices of the available options and getting the best deal.
Given below is the correct process of measuring a chair properly:
At first, the seat cushion must be removed from the chair, in case that is possible. After that, the thickness or height and length of the cushion will have to be measured properly with the help of a measuring tape. Both the measurements should be multiplied by two and then added together.
Now, each of the chair arms will have to be measured by starting from the outer part where the fabric covering exists, right up to the end portion of the arm fabric along the inner part of the seat. The width of the arms can be determined by measuring along their widest point. Now both of the end results will have to multiplied by two and added together.
The height of the chair must be measured along its back from the topmost part to the lowest portion where upholstery exists. It is also important to determine how tall the back support cushion is. Once that has been done, the depth of the seat will have to be measured accurately from its back to the chair’s front. If the cushion is not removable, the depth should be determined across the cushion.
Ultimately, the height of the upholstered chair along its front, starting right from where it meets the fabric or cushion and ending at the lowest point of the upholstered surface, must be measured.
Finally, all the measurements that have been taken during the entire process must be added to get a total amount. This amount must then be divided by 1000 in order to convert the entire measurement to metres.
Now a fabric of the obtained length can be bought from any reputed firm dealing with upholstery in Sydney. The product selected must be in a colour, style and pattern that suits the decor of the room where the chair is kept. The length of the fabric must be rounded to the next 1 metre to allow for any error that might have been made.